Not Bad.

[428CJ]

Large Rifle Caliber Loader for 300 WIN MAG to 50 BMG. Camdex PLC control panel with variable speed motor. Automatic case and bullet feeders. Sequence of machine functions. Automatic case and bullet feeders


Case Presence
Fiber Optic Primer Detection
Case Neck Rounding
Case neck OD size - carbide
Large Size Powder Canister
Powder drop accuracy +/- 0.15 grains
Adjustable belling
Powder probe
Automatic bullet feeding and seating – single drop mechanism
Secondary bullet seating
Adjustable crimp
Bullet presence
Fiber Optic Cartridge Counter at Exit
http://www.camdexloader.com/2300LargeRifle.aspx

[ArizonaGunOwners.com]

[car-ram-rod]

I've always wanted one of these.

[Arizonagunsmith]

I ran one of their 2100's for years. Great machines. The only draw back for us was the machine was set up for so many grains of Bullseye and there was no means of changing it as it had a fixed measure. Let me tell you though when you pop a primer on this puppy you best hit the deck. Debris everywhere from the ceiling tiles.

Jon

[Intel6]

Worked at a reloading shop when I was in college and they had 4x 2100's which we kept running almost every day as they had some decent police training ammunition contracts.  They are great machines but you need to make sure you feed them well.  We loaded with Win 213 and strained the powder to get out any big chunks and processed the cases to make sure there were no bad cases.  extra work but worth it because if a machine crashed it was a lot more work to clean and reset it and get it going again.

[ArizonaGunOwners.com]